Accessing System Programming Options - Mitel 3000 Administrator's Manual

Mitel 3000 Australia Administrator's Manual
ISDN Services
•
Set CLIR
If a call is received
•
Malicious call trace

Accessing system programming options

System programming options can also be programmed via a Feature phone. However, the
Feature phone must be connected to the extension that is programmed to be the Programming
Extension. By default, the Programming Extension is Extension 20.
You access all system programming options via the PROGRAM Key on the Feature phone
connected to Programming Extension.
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed. (The Scroll
Up ( ) and Scroll Down ( ) Keys may be used to scroll between the various
screens)
•
Select 'System programming'. Selecting 'System programming' from any extension
other than the programming Extension will result in the prompt 'Programming
refused' being displayed.
The following screen is displayed:
Enter the System Programming Password, which is 1111 by default.
Note: You can also enter system programming by dialling ##1111 at the Programming
Extension and selecting 'Send digits'.
The following screen appears offering options to configure the overall system, the extensions,
or the Lines.
•
Under 'System', you will find the programming options that affect the system as a
whole
•
Under 'Extensions', you will find the programming options that affect the extensions
•
Under 'Lines', you will find the programming options that affect the incoming Lines.
126
Not set
Enter system password
- Cancel
Select option
- System
- Extensions
- Lines
See page 114
See page 116