Mapping Dscp Values To Queues - Dell PowerConnect 3324 User Manual

Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
Mapping CoS Values to Queues Table.
CLI Command
wrr-queue cos-map queue-id
cos1.cosn
The following is an example of the CLI commands:
Console (config)# wrr queue cos-map 4 7

Mapping DSCP Values to Queues

The DSCP Mapping page allows network managers to determine the output queue that is
assigned per a specific DSCP field. To open the DSCP Mapping page:
NOTE: See
settings.
• Select Quality of Service > Global Parameters > Global Settings > DSCP Mapping
in the Tree View. The DSCP Mapping page opens.
348 Configuring Quality of Ser vice
Description
Maps assigned CoS values to the egress
queues.
DSCP to Queue Mapping Table Default Values for the list of DSCP default queue