Mapping Dscp Values To Queues - Dell PowerConnect 5424 User Manual

Mapping a CoS value to a Queue
1 Open the CoS to Queue Mapping Table page.
2 Select a CoS entry.
3 Define the queue number in the Queue field.
4 Click Apply Changes.
The CoS value is mapped to a queue, and the device is updated.
Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the CoS to
Queue Mapping Table page.
Table 9-7. CoS to Queue Settings CLI Commands
CLI Command
wrr-queue cos-map queue-id
cos1..cos8
The following is an example of the CLI commands:
Console (config)# wrr-queue cos-map 4 7

Mapping DSCP Values to Queues

The DSCP to Queue page provides fields for defining output queue to specific DSCP fields. For the list
of the DSCP default queue settings, see "DSCP to Queue Mapping Table Default Values" on page 412.
To open the DSCP to Queue page, click Quality of Service→ CoS Global Parameters→ DSCP to Queue
in the tree view.
Description
Maps assigned CoS values to the
egress queues.
Configuring Quality of Service
423