Global Queue Settings - Dell PowerConnect 5324 Release Note

Global Queue Settings

The following Screens has been updated under the QOS section
Add the following field descriptions below the current descriptions:
•
WRR — Specifies if traffic scheduling is based on the Weighted Round Robin (WRR) weights to egress queues.
•
WRR Weight — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode.
Each queue has a weight range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.
NOTE:
If a queue is set to 0 weight, the queue is not operational and is effectively closed.
•
% of WRR Bandwidth — The percentage translation of the weight defined in the WRR Weight field.
There are four optional Strict Priority (SP) to WRR configuration combinations:
•
The default - 4 SPs
•
4 WRRs
•
2 WRRs + 2 SPs (1WRR, 2 WRR, 3 SP, 4 SP or 3 WRR, 4 WRR, 1 SP, 2 SP)
•
3 WRRs (1, 2 , 3) + 4 SP
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Subject to Change Without Notice Page 10