Configuring Port-Based Security (Cli); Configuring Basic 802.1X Authentication Settings - Dell PowerConnect 7048P Manual

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Configuring Port-Based Security (CLI)

This section provides information about commands you use to configure

802.1X and Port Security settings. For additional information about the

commands in this section, see the

Beginning in Privileged EXEC mode, use the following commands to enable

and configure 802.1X authentication on the switch.

aaa authentication

dot1x default

dot1x system-auth-

Configuring 802.1X and Port-Based Security

PowerConnect 7000 Series CLI Reference

Enter Global Configuration mode.

Specify the authentication method to use to authenticate

802.1X clients that connect to the switch.

—The method keyword can be radius, none, or

Globally enable 802.1X authentication on the switch.

Enter interface configuration mode for the specified

interface. The

and number, for example gigabitethernet 1/0/3.

You can also specify a range of interfaces with the interface

range command, for example, interface range

gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,

variable includes the interface type