Trap Managers Table; Snmp Trap Settings Cli Commands - Dell PowerConnect 5324 User Manual

Figure 6-75. Trap Managers Table
Deleting a Trap Manager Table Entry
1
Open SNMP Trap Settings page.
2
Click Show All.
The Trap Managers Table page opens.
3
Select a Trap Managers Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The selected trap manager is deleted, and the device is updated.
Configuring Traps Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNMP Trap Settings page.
Table 6-44. SNMP Trap Settings CLI Commands
CLI Command
snmp-server enable traps
snmp-server trap
authentication
snmp-server host host-addr
community-string [1 | 2]
show snmp
184
Configuring System Information
Description
Enables the device to send SNMP traps or SNMP
notifications.
Enables the device to send SNMP traps when
authentication failed.
Determines the trap type sent to the selected
recipient.
Displays the SNMP communications status.