Advanced Features; Dot1X Auth-Not-Req - Dell PowerConnect 5424 Command Line Interface Manual

EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource

ADVANCED FEATURES

dot1x auth-not-req

The dot1x auth-not-req VLAN Configuration mode command enables unauthorized users access to that
VLAN. Use the no form of this command to disable the access.
Syntax
• dot1x auth-not-req
• no dot1x auth-not-req
This command has no arguments or keywords.
Default Configuration
User should be authorized to access the VLAN.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• An access port cannot be a member in an unauthenticated VLAN.
• The native VLAN of a trunk port cannot be an unauthenticated VLAN.
• For a general port, the PVID can be the Unauthenticated VLAN (although only tagged packets would
be accepted in Unauthorized state).
Examples
The following example enables unauthorized users access to the VLAN.
console config-if(Config-VLAN)# dot1x auth-not-req
The number of EAPOL frames that have been received by this Authenticator in which
the Packet Body Length field is invalid.
The protocol version number carried in the most recently received EAPOL frame.
The source MAC address carried carried in the most recently received EAPOL frame.
505
802.1x Commands