Extreme Networks Summit1 Installation And User Manual page 76

C P
ONFIGURING ORTS
Table 4-1: Port Commands (continued)
Command
disable smartredundancy <portlist>
show port {<portlist>} collisions
show port {<portlist>} config
show port {<portlist>} information
show port {<portlist>} packet
show port {<portlist>} qosmonitor
show port {<portlist>} rxerrors
show port {<portlist>} stats
4-4
Description
Disables the smart redundancy feature. If the
feature is disabled, the switch changes the
active link only when the current active link
becomes inoperable.
Displays real-time collision statistics.
Displays the port configuration, including the
following:
Port state
Link state
Link speed
Duplex mode
Flow control
Load sharing information
Link media information
Displays detailed system-related information,
including the following:
Port state
Link state
Autonegotiation state
Link speed
Duplex mode
Load sharing information
EDP status
SummitLink mode status
VLAN information
QoS information
Displays a histogram of packet statistics.
Displays real-time QoS statistics. For more
information on QoS, refer to
Displays real-time receive error statistics. For
more information on error statistics, refer to
Chapter 12.
Displays real-time port statistics. For more
information on port statistics, refer to
Chapter 8.
Chapter 12.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE