Extreme Networks Summit1 Installation And User Manual page 181

Table 12-1: Switch Monitoring Commands (continued)
Command
show port {<portlist>} information
show port {<portlist>} packet
show port {<portlist>} qosmonitor
show port {<portlist>} rxerrors
show port {<portlist>} stats
show port {<portlist>} txerrors
show port {<portlist>} utilization
show protocol {<protocol> | all}
show qosmonitor
show qosprofile {<qosname> | all}
show rip {vlan <name> | all}
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE
Description
Displays detailed system-related information, including
the following:
Port state
Link state
Autonegotiation state
Link speed
Duplex mode
Load sharing information
EDP status
SummitLink mode
VLAN information
QoS information
Displays a histogram of packet statistics.
Displays real-time QoS statistics.
Displays real-time receive error statistics.
Displays real-time port statistics.
Displays real-time transmit error statistics.
Displays real-time port utilization information. Use the
[Spacebar] to toggle between packet, byte, and
bandwidth utilization information.
Displays protocol information including protocol name,
protocol fields, and the list of VLANs that use this
protocol.
Displays the QoS monitor configuration and results.
Displays QoS profile information including the QoS
profile name, minimum bandwidth, maximum
bandwidth, and priority levels. Also displays the
groupings to which this QoS profile is applied.
Displays RIP configuration and statistics for one or
more VLANs.
S M
TATUS ONITORING
12-5