Extreme Networks Summit1 Installation And User Manual page 179

Table 12-1: Switch Monitoring Commands (continued)
Command
show ipmc cache {<group>
{<src_ipaddress> <mask>}} | all}
show ipqos {<ip_destination_address>
<mask> | all}
show iproute vlan {<name> | all |
permanent | <ipaddress> <mask>}
show ipstats {vlan [<name> | all]}
show log {<priority>} {<subsystem>}
show log config
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE
Description
Displays the IP multicast route table. Information
displayed includes the following:
IP group address
IP source address and mask
Upstream neighbor
Interface to upstream neighbor
Route expiration timer
Routing protocol
List of next hop interfaces and protocols
Displays the IP QoS table.
Displays the contents of the IP routing table.
Displays statistics of packets handled by the CPU,
including the following:
inpackets, outpackets
ICMP/IGMP statistics
IRDP statistics
Displays the current snapshot of the log. Options
include:
priority — Filters the log to display message
with the selected priority or higher (more critical).
Priorities include critical, warning, and
informational. If not specified, informational priority
messages and higher are displayed.
subsystem — Filters the log to display
messages associated with the selected switch
subsystem. Subsystems include Syst, STP Brdg,
SNMP, Telnet, VLAN, and Port. If not specified,
all subsystems are displayed.
Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages
being sent to the syslog host.
S M
TATUS ONITORING
12-3