Ospf Show Commands; Ospf Settings - Extreme Networks Summit1 Installation And User Manual

R P
OUTING ROTOCOLS
config ospf area 0.0.0.6 stub nosummary stub-default-cost 10
config ospf vlan LA_161_48_2 area 0.0.0.6
config ospf vlan Chi_160_26_2 area 0.0.0.5
config ospf add virtual-link 160.26.25.1 0.0.0.5
config ospf add vlan all
enable ospf
C
ONFIGURATION FOR
The following is the configuration for the router labeled IR1:
config vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0
config vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0
config ospf add vlan all
enable ipforwarding
enable ospf
D OSPF S
ISPLAYING
To display settings for OSPF, use the commands listed in
Table 10-5: OSPF Show Commands
Command
show ospf
show ospf area {<areaid> | all}
show ospf interfaces {vlan <name> | area
<areaid> | all}
show ospf lsdb {detail} {area <areaid> | all}
{router | network | summary_net | summary_asb
| as_external | all}
show ospf virtual-link {<areaid> <routerid> | all}
10-18
IR1
ETTINGS
Description
Displays global OSPF information.
Displays information about a particular OSPF
area, or all ospf areas.
Displays information about one or all OSPF
interfaces. If no argument is specific, all
OSPF interfaces are displayed.
Displays a table of the current link state
database. You can filter the display using
either the area ID or the remote router's
router ID, or the link state ID. The default is
all with no detail. If detail is specified,
each entry includes complete LSA
information.
Displays virtual link information about a
particular router or all routers.
Table 10-5.
S S
UMMIT WITCH
I U G
NSTALLATION AND SER UIDE