B
OOT
Table 14-1
Table 14-1: Boot Option Commands
Command
show config
download config <ipaddress> <filename>
download image [xmodem | <ipaddress>
<filename>] {primary | secondary}
reboot {<date> <time> | cancel}
save {config} {primary | secondary}
upload config <ipaddress> <filename> {every
<time> | cancel}
use config {primary | secondary}
use image [primary | secondary]
S
S
I
UMMIT
WITCH
NSTALLATION AND
O
C
PTION
OMMANDS
lists the commands associated with Summit boot options.
U
G
SER
UIDE
Description
Displays the current switch configuration to the
terminal. You can then capture the output and
store it as a file.
Downloads a previously saved ASCII
configuration file from a specific IP host.
Downloads a new image by way of XMODEM
using the serial port, or from a TFTP server
over then network. If no parameters are
specified, the image is saved to the current
image.
Reboots the switch at the date and time
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the cancel option.
Saves the current configuration of the switch to
NVRAM. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the configuration
area currently in use.
Uploads the current runtime configuration to
the specified TFTP server. If every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at
the specified time. To cancel automatic
upload, use the cancel option. If no options
are specified, the current configuration is
uploaded immediately.
Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the switch uses the primary configuration area.
Configures the switch to use a particular image
on the next reboot.
B
O
C
OOT
PTION
OMMANDS
14-5
Need help?
Do you have a question about the Summit1 and is the answer not in the manual?