IP U
R
NICAST
OUTING
Table 9-4: Router Show Commands (continued)
Command
show ipfdb {<ipaddress> <netmask> | vlan
<name> | all}
show iproute vlan {<name> | all | permanent |
<ipaddress> <mask>}
R
ESETTING AND
To return router settings to their defaults and disable routing functions, use the
commands listed in
Table
Table 9-5: Router Reset and Disable Commands
Command
clear iparp [<ipaddress> | vlan <name> | all]
clear ipfdb [<ipaddress> <netmask> | vlan
<name> | all]
disable bootp vlan [<name> | all]
disable bootprelay
disable icmp redirects {vlan <name> | all}
disable icmp unreachables
disable icmp useredirects
disable ipforwarding {vlan <name> | all}
disable ipforwarding broadcast {vlan
<name> | all}
disable irdp {vlan <name> | all}
unconfig icmp
unconfig irdp
9-18
Description
Displays the contents of the IP forwarding
database table. Used for technical support
purposes.
Displays the contents of the IP routing table.
D
R
ISABLING
OUTER
9-5.
Description
Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
Removes the dynamic entries in the IP
forwarding database.
Disables the generation and processing of
BOOTP packets.
Disables the forwarding of BOOTP requests.
Disables the generation of ICMP redirects on one
or more VLANs.
Disables the generation of ICMP unreachable
messages on one or more VLANs.
Disables the changing of routing table information
when an ICMP redirect message is received.
Disables routing for one or more VLANs.
Disables routing of broadcasts to other networks.
Disables the generation of router advertisement
messages on one or more VLANs.
Resets all ICMP settings to the default values.
Resets all router advertisement settings to the
default values.
S
ETTINGS
S
S
UMMIT
WITCH
I
U
G
NSTALLATION AND
SER
UIDE
Need help?
Do you have a question about the Summit1 and is the answer not in the manual?