Resetting And Disabling Rip; Rip Reset And Disable Commands - Extreme Networks Summit1 Installation And User Manual

R
ESETTING AND
To return RIP settings to their defaults, or to disable RIP, use the commands listed in
Table 10-3.
Table 10-3: RIP Reset and Disable Commands
Command
config rip delete [vlan <name> | all]
disable rip
disable rip aggregation
disable rip splithorizon
disable rip poisonreverse
disable rip triggerupdate
disable rip exportstatic
unconfig rip {vlan <name> | all}
S S I
UMMIT WITCH NSTALLATION AND
D
ISABLING
U G
SER UIDE
RIP
Description
Disables RIP on an IP interface. When RIP is
disabled on the interface, the parameters are not
reset to their defaults.
Disables RIP.
Disables the RIP aggregation of subnet
information on a RIP version 2 interface.
Disables split horizon.
Disables poison reverse.
Disables triggered updates.
Disables the filtering of static routes.
Resets all RIP parameters to the default VLAN.
Does not change the enable/disable state of the
RIP settings.
R D RIP
ESETTING AND ISABLING
10-13