Extreme Networks Summit1 Installation And User Manual page 182

S M S
TATUS ONITORING AND TATISTICS
Table 12-1: Switch Monitoring Commands (continued)
Command
show rip stat {vlan <name> | all}
show session
show stpd {<stpd_name> | all}
show stpd <stpd_name> port <portlist>
show switch
12-6
Description
Displays RIP-specific statistics. Statistics include the
following per interface:
Packets transmitted
Packets received
Bad packets received
Bad routes received
Number of RIP peers
Peer information
Displays the currently active Telnet and console
sessions communicating with the switch. Provides
the user name, IP address of the incoming Telnet
session, whether a console session is currently
active, and login time. Sessions are numbered.
Displays STP information for the one or all STP
domains.
Displays port-specific STP information including STP
port configuration and state.
Displays the current switch information, including:
sysName, sysLocation, sysContact
MAC address
Current time and time, and system uptime
Operating environment (temperature, fans, and
power supply status)
NVRAM image information (primary/secondary
image, date, time, size, version)
NVRAM configuration information
(primary/secondary configuration, date, time, size,
version)
Scheduled reboot information
802.1p information
System serial number and reworks indicator
Software platform
System ID
Power supply and fan status
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE