Configuring Management Access - Extreme Networks Summit1 Installation And User Manual

A T S
CCESSING HE WITCH
C M A
ONFIGURING ANAGEMENT CCESS
The Summit supports the following two level levels of management:
• User
• Administrator
A user-level account has viewing access to all manageable parameters, with the
exception of the following:
• User account database
• SNMP community strings
A user-level account can use the command to test device reachability, and change
ping
the password assigned to the account name. If you have logged on with user
capabilities, the command-line prompt will end with a (>) sign. For example:
Summit1:2>
An administrator-level account can view and change all switch parameters. It can also
add and delete users, and change the password associated with any account name. The
administrator can disconnect a management session that has been established by way of
a Telnet connection. If this happens, the user logged on by way of the Telnet connection
is notified that the session has been terminated.
If you have logged on with administrator capabilities, the command-line prompt will
end with a (#) sign. For example:
Summit1:18#
The prompt text is taken from the SNMP setting. The number that follows the
sysname
colon indicates the sequential line/command number.
If an asterisk (*) appears in front of the command-line prompt, it indicates that you
have outstanding configuration changes that have not been saved. For example:
*Summit1:19#
For more information on saving configuration changes, refer to Chapter 14.
3-8 S S I U G
UMMIT WITCH NSTALLATION AND SER UIDE