Extreme Networks Summit1 Installation And User Manual page 180

S M S
TATUS ONITORING AND TATISTICS
Table 12-1: Switch Monitoring Commands (continued)
Command
show management
show memory
show mirroring
show ospf
show ospf area {<areaid> | all}
show ospf interfaces {vlan <name> |
area <areaid> | all}
show ospf lsdb {detail} {area <areaid> |
all} {router | network | summary_net |
summary_asb | as_external | all}
show ospf virtual-link {<areaid>
<routerid> | all}
show port {<portlist>} collisions
show port {<portlist>} config
12-4
Description
Displays network management configuration and
statistics including enable/disable states for Telnet
and SNMP, SNMP community strings, authorized
SNMP station list, SNMP trap receiver list, and login
statistics.
Displays the current system memory information.
Displays the port-mirroring configuration.
Displays global OSPF information.
Displays information about a particular OSPF area,
or all ospf areas.
Displays information about one or all OSPF
interfaces. If no argument is specific, all OSPF
interfaces are displayed.
Displays a table of the current link state database.
You can filter the display using either the area ID or
the remote router's router ID, or the link state ID. The
default is all with no detail. If detail is specified,
each entry includes complete LSA information.
Displays virtual link information about a particular
router or all routers.
Displays real-time collision statistics.
Displays the port configuration, including the
following:
Port state
Link state
Link speed
Duplex mode
Flow control
Load sharing information
Link media information
QoS information
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE