Extreme Networks Summit1 Installation And User Manual page 178

S M S
TATUS ONITORING AND TATISTICS
Table 12-1: Switch Monitoring Commands (continued)
Command
show config
show diag
show dvmrp {vlan <name> | route | all}
show edp
show fdb {all | <macaddress> | vlan
<name> | <portlist> | permanent | qos}
show gvrp
show igmp snooping {<vlan <name> |
all}
show iparp {<ip_address> | vlan
<name> | all | permanent}
show iparp proxy {<ipaddress> {<mask}
| all}
show ipconfig {vlan <name> | all}
show ipfdb {<ipaddress> | vlan <name>
| all}
12-2
Description
Displays the current switch configuration to the
terminal. You can then capture the output and store
it as a file.
Displays switch software diagnostics.
Displays the DVMRP configuration and statistics, or
the unicast route table. The default setting is all.
Displays connectivity information for neighboring
Summit switches.
Displays the forwarding database contents including
MAC address, associated VLAN, port, age-of-entry
configuration method, and status. Providing one of the
options acts as a filter on the display. Providing a
VLAN name displays all entries for the VLAN. Use the
MAC address to locate a specific entry in the FDB.
Displays the current configuration and status of
GVRP.
Displays IGMP snooping registration information, and
a summary of all IGMP timers and states.
Displays the IP Address Resolution Protocol (ARP)
table. You can filter the display by IP address, VLAN,
or permanent entries.
Displays the proxy ARP table.
Displays configuration information for one or more
VLANs, including the following:
IP address, subnet mask
IP forwarding information
BOOTP configuration
VLAN name, VLANid
Global ICMP configuration
Global IGMP configuration
Global IRDP configuration
Displays the contents of the IP forwarding database
table.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE