Extreme Networks Summit1 Installation And User Manual page 55

Table 3-3: Common Commands (continued)
Command
config time <date> <time>
config vlan <name> ipaddress <ip_address>
{<mask>}
enable bootp vlan [<name> | all]
enable idletimeout
clear session <number>
disable bootp vlan [<name> | all]
disable idletimeout
disable port <portlist>
disable telnet
disable web
delete account <username>
delete vlan <name>
unconfig switch {all}
show banner
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE
Description
Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You
cannot set the year past 2023.
Configures an IP address and subnet
mask for a VLAN.
Enables BOOTP for one or more VLANs.
Enables a fixed value timer that
disconnects all sessions (both Telnet and
console) after 20 minutes of inactivity.
The default setting is disabled.
Terminates a Telnet session from the
switch.
Disables BOOTP for one or more VLANs.
Disables the fixed value timer that
disconnects all sessions. Once disabled,
console sessions remain open until the
switch is rebooted. Telnet session remain
open until you close the Telnet client.
Disables a port.
Disables Telnet access to the switch.
Disables Web access to the switch.
Deletes a user account.
Deletes a VLAN.
Resets all switch parameters (with the
exception of defined user accounts) to the
factory defaults. If you specify the
keyword all, the user account information
is reset as well.
Displays the user-configured banner.
C C
OMMON OMMANDS
3-7