Setting Usb-Related Functions; Setting The Digital Audio Signal Input/Output; Direct Monitor Settings - Boss GT-PRO Owner's Manual

Setting USB-Related Functions

This section describes the GT-PRO's USB functions. Set these
functions according to how you want to use the unit.
Setting the Digital Audio Signal
Input/Output
fig.09-0050
1. Press [OUTPUT SELECT].
2. Press PARAMETER [
setting screen.
3. Rotate the PATCH/VALUE dial to change the setting's
value.
4. Repeat Steps 2 and 3 as needed.
5. Press [EXIT] to return to the Play screen.
Parameter/
Explanation
Range
USB/DGT Out Ch. (USB/Digital Out Channel)
fig.09-0060d
MAIN, SUB, Selects the signals output from the USB
MAIN+SUB (Computer) and DIGITAL OUT connectors.
MAIN
Outputs the same signals as those output from MAIN OUT.
The tone adjustments made with Main Global EQ (p. 94) are enabled.
SUB
Outputs the same signals as those output from SUB OUT.
The tone adjustments made with Sub Global EQ (p. 95) are enabled.
MAIN+SUB
Outputs a mix of the signals output from MAIN OUT and SUB OUT.
* This is enabled only when effects chain (p. 22) settings ending in
"DGT" (DIGITAL/USB OUT) are selected.
USB/DGT Out Lev (USB/Digital Out Level)
fig.09-0070d
Adjusts the volume level of the digital audio
0–200 signals output to the USB (Computer) and
DIGITAL OUT connectors.
Chapter 9 Using the GT-PRO Connected to a Computer Via USB
3 2 1
5
] [ ] to display the USB
Parameter/
Explanation
Range
USB Mix Channel
fig.09-0080d
Sets the output jacks used in mixing the dig-
MAIN, SUB, ital audio signals from USB (Computer)
MAIN+SUB when Input Select (p. 90) is set to "Guitar
In."
MAIN
Mixed at MAIN OUT.
SUB
Mixed at SUB OUT.
MAIN+SUB
Mixed at MAIN OUT and SUB OUT.
USB Mix Level
fig.09-0090d
Sets the volume level of the mixed digital
0–200 audio signals from USB (Computer) when
Input Select (p. 90) is set to "Guitar In."

Direct Monitor Settings

fig.09-0100
1. Press [SYSTEM].
2. Press PARAMETER [
parameter that you want to set appears in the display.
3. Rotate the PATCH/VALUE dial to change the setting's
value.
4. Repeat Steps 2 and 3 as needed.
5. Press [EXIT] to return to the Play screen.
3 2 1
5
] [ ] so that the
89