Section 3. Changing How The Sample Plays (Editing); Playing A Phrase Repeatedly (Loop Playback); Playing The Sound Only Once (One Shot Playback) - Boss Dr.Sample SP-202 Owner's Manual

26
• If
you make ONE SHOT light during Loop playback,
One Shot Playback will be selected after the currently-
playing sound has ended.
• When you playback, if there is an interval of silence at
the beginning of the sound or an unwanted portion at
the end of the sound, you can use the editing operation
described in the following section "Playing only the
desired portion of a sound."
....._____,) 11......._-.JII . . . . _ _ __,
\ \ I I
'
'
. .
:ONE SHOT-
,
. .
,
, ,
''
2. Press the LOOP/ONE SHOT button to make ONE
SHOT light.
1. Press the pad which contains the sample for
which you wish to specify One Shot Playback.
(I.e., specify the current pad.)
The pad will light, and the sample will sound.
For sounds (such as drums) that you want to playback only
once when you press the pad, use One Shot Playback.
I
Playing the sound only once
(One Shot Playback)
• If you make LOOP light during One Shot playback, Loop
Playback will be selected immediately.
.______.I . . . . . . . ! I . . . . . . . 1 ----
'\ I I
~LOOP-
. .
. .
,
"\
2. Press the LOOP/ONE SHOT button to make
LOOP light.
1. Press the pad which contains the sample that you
wish to playback as a loop. (I.e., specify the cur-
rent pad.)
The pad will light, and the sample will sound.
I
repeated
I
If you have sampled a phrase of several measures and wish
to play it back repeatedly, use Loop Playback.
I
Playing a phrase repeatedly
(Loop Playback)
The display shows the sample settings of the last-sounded
pad (the current pad) or the BPM (tempo) value.
By pressing one of the edit buttons, you can modify (edit)
the way in which the sample of the current pad will play.
If
you have pressed two or more pads to play samples, and
are unsure which pad is the current pad, press the REMAIN
button. The pad which blinks is the current pad. For details
refer to page 30 "Checking the current pad."
• Settings that you edit while samples are playing are
saved into memory when all pads have finished sound-
ing. For this reason, never turn off the power while
sounds are playing.
Section 3. Changing how the sample plays
(Editing)