Switching Between Play Screens; Adjusting The Input/Output Level - Boss RC-600 Owner's Manual

Getting Ready

Switching Between Play Screens

The screen that appears after you turn on the power is called the "play screen. "
[1] [2] [3] [4]
Parameters to set using the [1]–[4] knobs
Press the PAGE [K] or [J] button while the play screen is shown to switch between variations of the play screen.
(1) MEMORY NUMBER
(2) TRACK STATUS
Loop track status is shown with an icon
Icon Explanation
Recording, playing back, overdubbing
Stopped (phrase exists)
No phrase
Current track

Adjusting the Input/Output Level

Press the [ENTER] button while the play screen is shown to display the MIXER screen, where you can check the input/output levels for each
jack and connector.
Use the PAGE [K] [J] buttons to switch between pages, and turn the [1]–[4] knobs to adjust the respective input/output levels.
Switches the page
Mute: On
5 Adjust the levels so that the peak indicator on the level meter matches the scale shown in the illustration.
5 For the inputs, push the [1]–[4] knobs to mute the sound.
5 Use the MASTER OUT to adjust the levels of the MAIN OUTPUT, SUB OUTPUT 1 and SUB OUTPUT 2. The [OUTPUT LEVEL] knob is
configured to adjust the levels as well by factory default.
The jacks and connectors shown in the MIXER screen may change, depending on the stereo link settings.
Stereo link Explanation
ON The MIC 1, 2 and L/R channels are shown as a single connector.
OFF The MIC 1, 2 and L/R channels are shown separately.
* For details on stereo link, refer to the "Parameter Guide" (PDF).
8
Icon
Memory number
Memory name
(3) LOOP TRACKS
Displays the track status + progress during playback
(4) LOOP STATUS
Indicates the status of the tracks
(5) LOOP LEVEL
Volume of each track is shown by the level meters
[J]
[K]
Peak indicator Scale
Explanation
Tempo
Phantom power for MIC 1, 2 connectors is on (off when not displayed)
Knob lock function is on (off when not displayed)
[J]
[K]
(6) INPUT FX
Indicates the input FX status
On
Off
A B C D
(7) TRACK FX
Indicates the track FX status
* You can change which play screen is
shown on startup.
& "Parameter Guide" (PDF)