Removal 47 MULTI PROTOCOL CARD (PL9.1.31)
Use a wristband to protect the MPC from electrostatic damage.
2)-1
2)-1
2)-2
1)
Loosen the SCREW KNURLING (PL9.1.22), and then open the SHIELD WINDOW
(PL9.1.21).
2)
Remove the COVER USB (PL9.1.34) from the printer by releasing its two hooks.
3)
Remove the WIRELESS LAN ADAPTER (PL9.1.32) from the MULTI PROTOCOL CARD
(PL9.1.31).
4)
Remove the two SCREW KNURLINGs (PL9.1.22) that fix the MULTI PROTOCOL CARD to
the printer.
5)
Remove the MULTI PROTOCOL CARD from the ELECTRONIC SUB-SYSTEM CONTROL
BOARD (PL9.1.27).
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
4)
4)
3)
3 - 77
5)
1)
Kmy03128KB