7.5
Winding the bobbin thread
5
4
3
1
2
–
Put bobbin on bobbin winder 4.
–
Pull thread through guide 2 and around tension 1.
–
Wind thread counter-clockwise around the core of the bobbin
(approx. 5 times).
–
Press the bobbin-winder lever 3 in the bobbin.
–
Sew.
The winder lever stops as soon as the bobbin is full.
–
Tear off thread at thread clamp 5 after winding up is finished.
Note!
If the thread is to be wound on without sewing, the thread winding
mode can be altered in sub-menu "Special functions".
:
:
:
If the thread winding mode is active, the sewing motor can be started
via pedal or push button independent of the sewing field drive
(unthread at the thread lever).
For adjustment, see chapter 8.5.1 "Thread winding mode".
6
Off
On
...
1
11