1.
Product Description
The Dürkopp Adler 511 is a CNC machine for bartacking seams and
short seams. The available standard bartacks are size-adjustable and
can additionally be saved in this modified shape.
Free seam contours can be programmed directly at the control panel
without any further devices.
Technical features
–
DAC control unit with control panel.
The following functions are available:
–
50 standard bartacks.
These bartacks can temporarily be modified in respect to
length, width and speed. When switching off the machine, the
modified values of the bartack last sewn are maintained.
–
40 modified bartacks can also be saved.
–
9 free seam contours with a total of 5000 available stitches
can also be saved.
So it is possible to attach small appliqués.
The coordinates are entered at the control panel. No further
devices are required.
–
25 seam pattern sequence programs with up to 20 seam
patterns per seam pattern sequence program can be created
and saved.
–
The coordinates are entered with a precision of 0.1 mm.
–
If there is a rectangular contour of the fabric clamping feet, the
modification of bartacks is automatically checked in order to
avoid a collision of needle and fabric clamping feet.
–
Counters are available for capacity and daily number of
pieces.
–
Bartacks and seam pattern sequence programs and the
modification of special bartacks can be blocked.
–
The speed can be changed from 0 rpm (manual operation with
full operability of the x-y drive) up to 2700 rpm in steps of 100
rpm.
–
Fabric drive via two step motors.
–
Drive of the automatic bartacker directly at the arm shaft via
brushless direct current motor.
–
Maximum sewing field size 40 x 20 mm.
–
Oil wick lubrication of arm shaft and driving shaft with two oil
reservoirs.
–
Service and maintenance work is supported by a comprehensive
test programs.
1
3