Duerkopp Adler 511 Operating Instructions Manual page 45

Clamping foot Max.
number Tack size
(X,Y) [mm]
1 19.0 x 3.5
2 20.0 x 4.1
3 26.0 x 4.0
4 9.0 x 3.5
5 4.6 x 20.0
6 18.0 x 11.0
7 40.0 x 20.0
8 8.5 x 3.6
9 14.0 x 14.0
10 11.0 x 8.0
11 8.6 x 11.6
12 11.6 x 7.5
13 12.9 x 11.2
14 16.0 x 2.6
16 8.6 x 13.6
Size X x Y Inner frame
[mm] Rectangular
Inner frame
20.0 x 4.5 yes
21.0 x 5.1 yes
27.0 x 5.0 yes
10.0 x 4.5 yes
5.6 x 23.0 yes
19.0 x 12.0 yes
44.0 x 24.0 yes
9.5 x 4.5 yes
16.0 x 16.0 no
12.0 x 14.0 no
24.6 x 12.6 no
12.6 x 21.0 no
34.8 x 12.2 no
17.0 x 3.6 yes
24.0 x 14.6 no
Length
Input of a freely selectable sewing field.
Input only possible when "free clamp dimension"
has been selected. Otherwise the length / width of
the selected clamp is indicated (and cannot be modified).
Input:
Width
Input of a freely selectable sewing field.
Input only possible when "free clamp dimension"
has been selected. Otherwise the length / width of
the selected clamp is indicated (and cannot be modified).
Input:
Configuration
The optional units can be activated in this sub-menu.
Caution – Fragile, danger of breakage!
When manufacturing the clamps for open dimensions, a safety margin
must be taken into account.
Description
Cross tack
Cross tack
Large cross tack
Small cross tack
Longitudinal tack
Small-field clamping foot
Large-field clamping foot
Contraction clamp
Circle
D-clamping foot, simple
Double-D clamping foot, lateral
Double-D clamping foot, longitudinal
Double-tri clamping foot, lateral
"Belt loop
Double-D clamping foot, lateral
0.5 – 20.0
0.5 – 40.0
h
41
1