Winding The Hook Thread - Duerkopp Adler 868-M PREMIUM Operating Instructions Manual

Operation
Operating Instructions 868-M PREMIUM - 01.0 - 05/2017
4.6

Winding the hook thread

WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Switch off the machine before threading the hook
thread.
Fig. 17: Winding the hook thread (1)
①
(1) - Hose guide
To wind the hook thread:
1. Fit the thread reel on the reel stand.
The unwinding bracket must stand directly above the thread
reel.
2. Insert the thread from the rear to the front through the unwind-
ing bracket (2).
3. Use compressed air to blow the thread through the hose
guide (1).
②
(2) - Unwinding bracket
37