Duerkopp Adler 511 Operating Instructions Manual page 75

8.6.4.5 Memory dongle
With this sub-menu, data can be transferred from the machine to the
dongle or vice versa.
Dongle index
Load
Save
Format
Dongle contents
With this menu item, the content of a dongle connected to the control
unit can be displayed.
Load
With this menu item, program data (seam pattern programs and
sequences), machine parameters and free seam contours can be
uploaded from the dongle to the machine.
Save
With this menu item, program data (seam pattern programs and
sequences), machine parameters and free seam contours can be
saved to a data dongle.
Format
Before saving data to a dongle, it must be formatted as a data dongle.
The dongle should be inserted into the port on the control unit labelled
"Dongle" (X110).
1
71