Input Test - Duerkopp Adler 511 Operating Instructions Manual

Input element
S 1
S2
S14
S15
S16
S17
Ref. N
Ref. X
Ref. Y

Input test

With this testing function, the input element to be tested is selected.
CAUTION !
The input elements have been carefully adjusted in the factory.
Adjusting and correcting should only be carried out by trained service
staff.
Caution – Risk of Injury !
Do not reach into the working area of the machine when starting and
ending the input tests.
–
Start the test function with the "OK" key.
–
Select the desired input element with the "ñ" and "ò" keys.
The switching status of the input element is indicated.
==== Input test =====
Input
–
Press the function key "ESC" in order to leave the test function.
The Multitest menu is displayed.
Function
Hand switch 1, if the option is activated
Hand switch 2, if the option is activated
Pedal A
Pedal B
Pedal C
Pedal D
Referencing switch for the sewing motor
X-reference switch
Y-reference switch
Also refer to the "Distributor PCB" section
The current configuration of the inputs is indicated in the sub-menu
"Input configuration" in the Configuration menu.
S1: +
1
53