Main Menu; Seam Pattern Operation - Duerkopp Adler 511 Operating Instructions Manual

8.6 Main menu

8.6.1 Seam pattern operations
The parameters for the individual seam patterns are found in the main
menu.
The seam patterns can be altered using these parameters.
–
Turn on the main switch.
The control unit is initialized.
The main menu appears.
–
Select the desired parameter with the "ñ" and "ò" keys.
The symbol of the selected parameter is displayed white on black.
–
Alter selected parameter as described in chapter 8.3.
Menu option
The symbol in the top left corner of the display describes
the currently selected menu item.
Bartack pattern
The symbol at the bottom left of the display shows the
current bartack pattern.
Seam pattern
This parameter is used to select the seam pattern to be
sewn.
Selection: 1 – 51 (52 to 99 if available)
Speed
The desired speed is set using this parameter.
Input: 0 to 2700 rpm
1
21