Duerkopp Adler 511 Operating Instructions Manual page 70

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

Sub-menu stitch coordinates

If the seam pattern to be altered has less than 99 stitches, the

sub-menu appears immediately.

If the seam pattern to be altered has more than 99 stitches, the

following menu appears first:

–

Select the desired range of stitches with the "ñ " or "ò" keys.

–

Select the range of stitches with the "OK" key.

The sub-menu "Stitch coordinates" appears

–

Select the desired stitch with the "ñ " or "ò" keys.

–

Select stitch with the "OK" key.

The sub-menu for altering a stitch coordinate appears.

If a stitch has a stitch operation attributed to it, it will be marked with an

asterisk (*) instead of a slash (/).

Table of Contents