Duerkopp Adler 511 Operating Instructions Manual page 89

Error code Description
4312 Unknown dongle type
4530 Menu system / user
- message error
4537
4900
5101 NV-RAM empty
5104 NV-RAM checksum
error
5804 Free contours:
Checksum incorrect
5808 Error: free seam
contour,
stitch number cannot
be determined
5809 Free contours:
Max. number of partial
contours
5810 Free contours:
Min. number of
stitches per partial
contour
5900 Sequences error –
Invalid sequence
number
6152 Input/output error
-
6154
6204
6351
2
- I C error
6354
6551 Upper position error /
6554 AD converter /
6651 Processor error / Step
6751 motor driver
-
6759
7460 Communication test
interface
Possible cause
- Dongle has been
incorrectly formatted
- Dongle faulty
Internal error
Control unit is new, no
data available.
Control unit is from
another machine class,
data is not compatible
- NV-SRAM faulty
- Malfunction
- NV-SRAM faulty
- Malfunction
Internal error
Max. number of partial
contours (intermediate
cuttings) exceeded
Min. number of stitches
per partial contour not
present
Internal error
Internal error
Control unit faulty
Internal error
- Line interference
- Cable to test interface is
faulty
- Internal error
Remedy
- Reformat dongle
- Use a different dongle
Turn machine off and then on again.
Software update.
Inform DA service
Data reset to factory settings
- Check with Multitest.
Check control unit
- Turn machine off and on again.
Data reset to factory settings
- Check with Multitest
- Check control unit
- Switch machine off and on again.
Data reset to factory settings
- Switch machine off and on again
- Software update
- Inform DA Service
Delete the intermediate cutting
operations in the free contours
Change the intermediate cutting
operations in the free contours
- Switch machine off and on again
- Software update
- Inform DA Service
- Switch machine off and on again
- Software update
- Inform DA Service
Check the control unit
- Switch machine off and on again
- Software update
- Inform DA Service
- Switch off source of interference
- Check the cable
- Switch machine off and on again.
1
85