Operations; Threading The Needle Thread; Operations 7.1 Threading The Needle Thread - Duerkopp Adler 511 Operating Instructions Manual

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

Operations

7.1

Caution – Risk of Injury !

Turn the main switch off!

Insert the needle thread only when the automatic bartacker

is switched off.

–

Put thread reels on the thread reel holder and insert needle thread

and bobbin thread through the unwinding arm.

The unwind holder must be perpendicular to the reel.

–

Thread the needle thread as shown on the following illustration.

Table of Contents