Machine Operation Threading The Needle Thread; Winding The Hook Thread - Duerkopp Adler 887 Instruction Manual

6. Machine operation
6.1 Threading the needle thread
6.2

Winding the hook thread

Caution! Risk of injury!
Turn off the main switch.
The needle thread may only be threaded with the sewing machine
switched off.
–
Thread the single needle machine according to Fig. If the machine
is equipped for heavy sewing, wind the thread around the pin (1).
2
–
Thread the thread according to the picture.
–
Insert the thread under the knife (1) and tear off by pulling in the
arrow direction (2).
–
Fix the bobbin and press the lever (3) in the direction (4).
–
Start the machine up.
–
After the thread winding, slide the thread under the knife again (1)
and tear it off.
–
Insert another bobbin immediately and press the lever (3).
1
1 3 4
GB
9