Duerkopp Adler 511 Operating Instructions Manual page 44

40
Sub-menu for sewing equipment
In this sub-menu, adjustments for the sewing equipment can be made.
W.clamp f....
Open dimens.
Number:
Length:
Width:
Configuration
Note
The entry of the clamping foot number (also refer to chapter 12) is
used to automatically verify whether the seam pattern to be currently
sewn is positioned within the inner frame of the clamping foot.
If the clamp numbers 9 to 13 and 16 are selected, only certain seam
pattern numbers and sequence numbers are allowed.
If no clamping feet are specified, free (open) dimensions can also be
defined.
Clamping foot
Selection of a specified clamping foot as equipment.
Input: Alternative
Open dimensions
Selection of a clamping foot with free (open) sewing field
dimensions.
Input:
Number
Selection of a DA clamping foot number.
Input:
Ö
1
4.5
20.0
Alternative
1 ...16