Duerkopp Adler 511 Operating Instructions Manual page 46

42
Sub-menu Configuration
Hand sw.:
El.wiper.: Off
Thr.clamp:
_/-clamp:
Laserl.:
Input alloc.
Output alloc.
Hand switches
Activating of optional hand switches. When the option is switched on, a
menu item for selecting the operation mode will appear in the menu
"User configuration".
Input: ON / OFF
Electric thread wiper
The optional electrical thread wiper can be turned on or off here. It can
only be turned on as an alternative to the thread clamp. If this option is
activated while the thread clamp is turned on, the thread clamp will be
deactivated.
Input: ON / OFF
Thread clamp
Turn the thread clamp on and off. It can only be turned on as an
alternative to the electric thread wiper. If this thread wiper is activated
when the thread clamp is turned on, the thread wiper will be
deactivated.
Input: ON / OFF
Separate lowering of the clamping foot
Activating the operating of the optional, separate clamping feet.
Input: ON / OFF
Operating the separate lowering of the clamping foot
NOTE!
The function is only available with seam pattern programs (variants).
Sewing procedure with pedal
–
Push the pedal to the front to level 1: clamp 1 will be lowered
–
Move the pedal into the resting position
–
Push the pedal again to the front to level 1: clamp 2 will be lowered
–
Push the pedal to level 2: the sewing process will be started
–
Push the pedal back to level:
the clamp closed last will be lifted again
–
Push the pedal back to level and keep it pushed (0.8 second):
clamp 1 and clamp 2 will be lifted one after the other
Off
On
Off
Off