Duerkopp Adler 511 Operating Instructions Manual page 66

Maximum sewing area
(grey field)
Machine zero point
62
Coordinate system with
X- and Y-axis
Note
The seam contour should be laid out in such a way that the machine
neutral point is as close to the middle of the contour as possible.
–
Sketch the maximum sewing field size on the millimetre-scaled
graph paper (X = max. 40 mm, Y = max. 20 mm).
–
Draw the coordinate system in the centre of the sewing field.
–
Draw in seam contour.
–
Determine the X- and Y-coordinates for every desired stitch.
–
Enter X- and Y-coordinates in the control unit (refer to next page).
Stitch to be determined
Sketched seam contour