Machine Faults (Daciii) - Duerkopp Adler 511 Operating Instructions Manual

8.8.3 Machine faults/errors
Error code Description
1051 Sewing motor timeout
1055 Sewing motor
overload
1342 Sewing motor error
–
1343
2101 Step motor, X-axis,
Timeout Referencing
2103 Step loss-Test:
Step loss X-axis
2165 Step motor data
– X-axis
2167
2201 Step motor, Y-axis,
Timeout Referencing
2203 Step loss-Test:
Step loss Y-axis
2265 Step motor data
- X-axis
2267
2911 Step motor error
2914
3100 Machine control
voltage
3101 Machine power
voltage
Possible cause
- Cable to sewing-motor
- Reference switch is
defective
- Sewing motor is defective
- Mechanics are sluggish
- The sewing motor is
blocked or sluggish
- Sewing motor is defective
- Control unit defective
Internal error
- Cable to reference switch
is defective
- Reference switch is
defective
- Step motor is defective
- Mechanics are sluggish
- Stitch length within the
contour in the X direction
too big
Internal error
- Cable to reference switch
is defective
- Reference switch is
defective
- Step motor is defective
- Mechanics are sluggish
- Stitch length within the
contour in the Y direction
too big
Internal error
Internal error
Short-term mains voltage
drop
Short-term mains voltage
drop
Remedy
- Check the cable
Check the reference switch
- Check the sewing motor
- Check the mechanics
Fix the blockage or sluggishness
Check the sewing motor
Check the control unit
- Switch machine off and on again
- Software update
- Inform DA Service
- Check the cable
- Check the reference switch
- Check the step motor
- Check the mechanics
- Reduce the speed
- Reduce the scale of the contour
in the X direction
- Reduce the stitch length within
the contour in the X direction.
- Switch the sewing machine off
and on again
- Software update
- Inform DA Service
- Check the cable
- Check the reference switch
- Check the step motor
- Check the mechanics
- Reduce the speed
- Reduce the scale of the contour
in the Y direction
- Reduce the stitch length within
the contour in the Y direction.
- Switch the sewing machine off
and on again
- Software update
- Inform DA Service
- Switch machine off and on again
- Software update
- Inform DA Service
Check the mains voltage
Check the mains voltage
1
83