Duerkopp Adler 511 Operating Instructions Manual page 28

Sub-menu laser marking light (optional)
24
Winding thread onto a bobbin:
With the pedal:
–
Step pedal forwards (step 2).
The sewing motor starts.
–
Step pedal backwards.
The sewing motor stops.
With the control panel
–
Press the "F" key.
The sewing motor starts.
–
Press the "ESC" key.
The sewing motor stops.
With push button (optional)
–
Press button 2.
The sewing motor starts.
–
Press button 1.
The sewing motor stops.
Soft start
The soft start can be switched on or off using this parameter.
Input: ON / OFF
This menu item is only available when the laser light
option in the Configuration menu is activated.
Laser light 1 – 3
Switching on/off for the laser marking light 1 to 3.
Input: ON / OFF