7.8
Replacing the needle
2
14
1
Caution – Risk of Injury !
Turn the main switch off.
Change the needle only when the automatic bartacker is switched off.
–
Loosen screw 1.
–
Push in the new needle until it reaches the limit stop in the hole for
the needle bar 2.
CAUTION !
The hollow groove 3 of the needle must point to the hook.
–
Tighten screw 1.
CAUTION !
After the changeover to another needle size, the distance between
hook and needle has to be corrected (see service instructions).
2
1
3