Duerkopp Adler 511 Operating Instructions Manual page 20

Function key
OK key
ESC key
P key
S key
F key
16
Function
If no text field is activated:
Change between the lines of the menus.
The selected line is displayed white on black.
If a text field is activated:
Increase or reduce the value of the respective point by one, or change
between the parameters in the event that there are functions with
several choices.
If no text field is activated:
Activate the text field.
The value can be altered with the "ñ" and "ò" keys.
If a text field is activated:
The set value is applied.
If the clamping foot has been lowered using the keys OK + F:
The test procedure will be started.
If test functions are activated (Multitest / 180° disc):
You return to the selection menu.
If a text field is activated:
An input will be aborted.
The preceding value is maintained.
In the technician and programming level
The control changes over to the sewing mode.
In the sewing mode:
Lift clamping foot and stop sewing operation.
The control unit changes over from the sewing mode to the
programming mode.
In this mode, altered stitch patterns can be saved under a new
program number.
The control unit changes over from the sewing mode or seam pattern
programming mode to the sequence programming mode.
In this mode it is possible to create new sequences or to alter existing
ones.
The control changes over from the sewing mode to the technician
mode.
This mode can only be activated after a code has been entered.
In this operating status it is possible to set basic machine parameters
and to retrieve diagnostic and adjustment programs.