Operating The 511 Controller; The Control Panel; The Keys - Duerkopp Adler 511 Operating Instructions Manual
Cnc automat for bartacking seams and short seams
Hide thumbs
Also See for 511:
- Service instructions manual (44 pages) ,
- Installation instructions manual (32 pages) ,
- Fitting instructions manual (12 pages)
Table of Contents
Advertisement
8.
Operating the 511 Controller
8.1
The control panel
8.1.1
The keys
Function key
Cursor keys
A control panel with an LCD display and function keys is used for input
and output of data.
Function
If no text field is activated:
Press the "ï" key to return from a sub-menu to the parent menu.
If a text field is activated:
Change between the points (this does not refer to the selection of
seam patterns or sequences).
In the sewing mode during sequence operation:
Change to the next or to the preceding seam pattern.
1
15
Advertisement
Table of Contents
