Duerkopp Adler 511 Operating Instructions Manual page 49

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

8.6.4.2 User configuration

In this menu, user-specific settings are made.

Language

Hand switch: B

Par.lock.: Off

Pattern lock.

Sequence lock.

–

Select the desired parameter or sub-menu with the "ñ" and "ò"

keys.

The selected parameter or sub-menu is displayed white on black.

–

Start the selected parameter with the "OK" key or change into the

sub-menu.

Language

In this sub-menu, the language can be chosen.

German

Selection of the German language for the technician level.

English

Selection of the English language for the technician level.

Parameter

Selection of the numbering of menu items for the

technician level (see chapter 13).

–

Select the desired line with the "ñ" and "ò" keys.

–

Confirm by pressing the "OK" key.

The menu item in the technician level is then displayed in the

selected language.

Table of Contents