Maintenance; Cleaning And Checking; Maintenance 10.1 Cleaning And Checking - Duerkopp Adler 511 Operating Instructions Manual

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

10. Maintenance

Maintenance required

Maintenance work

Machine head

- Remove sewing dust and

residual thread (you can use

compressed air).

Control box

Caution – Risk of Injury !

Turn the main switch off.

Maintenance work of the automatic bartacker must only be

carried out when the machine is switched off.

All maintenance work must be carried out before or at the maintenance

intervals defined in the table (refer to the "operational hours" column).

When working with materials that are thick and fibrous, shorter

maintenance intervals may be required.

A clean automatic bartacker helps to prevent malfunctions.

Explanation

Important points to be cleaned:

- The area under the throat plate

- The area around the hook 1

- The bobbin enclosure

- The thread trimmer

- The area around the needle 2

- Clean fan grill

Operational interval

Table of Contents