Duerkopp Adler 511 Operating Instructions Manual page 52

48
Lock sequences
In this sub-menu, individual sequences can be released or locked for
selection in the sewing mode.
The menu item is only displayed when more than one seam pattern
sequence is programmed (refer to chapter 8.5.3, seam pattern
sequence)
Lock all
Unlock all
The following restrictions apply:
1. Seam pattern operations
·
The last sequence selected in the sequence operation cannot be
locked.
2. Seam pattern sequence operations
·
The sequence currently selected in the sewing mode cannot be
locked.
·
In the sewing mode, locked sequences cannot be chosen from the
selection list.
Locked sequences are marked with "#".
Lock all
All sewing sequences with the restrictions specified above will be
locked.
The status of the displayed sewing sequence number switches to
"OFF".
Unlock all
All sewing sequences will be unlocked.
The status of the displayed sewing sequence number switches
to "ON".
Lock/unlock individual sewing sequences
Input: ON / OFF
2: On
3: On