Duerkopp Adler 511 Operating Instructions Manual page 33

Cnc automat for bartacking seams and short seams

Hide thumbs Also See for 511:

Table of Contents

Sub-menu for seam pattern dimension

Select this sub-menu to set the seam pattern length and width.

Display: current length/width

Sub-menu for seam pattern offset

Select this sub-menu to set the seam pattern offset in the X and Y

directions.

Display: current X/Y offset values

Number of stitches

Only indicates the number of stitches.

Soft start

The soft start can be switched on or off using this parameter.

Input:

ON / OFF

First clamp (optional)

With this menu item you can set which part of the clamping foot (left or

right) will be lowered first. The menu item will only be displayed if the

"lower clamping foot separately" option is activated in the

Configuration menu.

Input:

½ (left/right)

Sub-menu for laser marking light (optional)

This menu item will only be displayed if the option Laser light is

activated in the Configuration menu.

Laser lights 1 – 3

Switching on/off for the laser marking lights 1 to 3.

Input:

ON / OFF

Table of Contents