Duerkopp Adler 511 Operating Instructions Manual page 79

Saving data on the dongle
Here, program data (seam pattern programs and sequences), machine
parameters or all free seam patterns can be downloaded from the
machine to the dongle.
Dongle index
Free contours
Progr./Sequ.
Machine param.
Machine cpl.
Contents
With this menu item, the content of a memory dongle connected to the
control unit can be displayed.
Before the following four data types are saved, a confirmation window
is displayed.
–
Press the "ï" key (no) in order to abort the process.
Press the "ð" key (yes) in order to continue with the process.
The time needed for saving depends on the number of seam pattern
programs and free seam patterns.
Free seam contours
The save process for all free seam contours can be started with this
menu item.
All free seam contours on the dongle will be deleted when saving!
Seam pattern programs and sequences
The save process for all seam pattern programs and sequences can be
started with this menu item.
All seam pattern programs and sequences on the memory dongle are
overwritten when saving.
1
75