32
Menu items in the main menu for the seam pattern sequence
Sequence
Selection of the seam pattern sequence.
Input:
1 (2 – 25, if available)
Sequence succession
Display of the sequence succession.
The current seam pattern number is marked with a bar (underlined).
If there are more than five numbers, the display is scrolled.
Further seam patterns on the right:
Further seam patterns on the left:
Further seam patterns left and right:
Automatic operations
After the completion of a seam pattern, the control unit changes over to
the next seam pattern shape automatically.
After sewing of the last seam pattern, the control unit changes over to
the first seam pattern within the sequence again.
The current seam pattern is marked by a bar below the number.
The shape of the selected seam pattern is indicated on the left half of
the display.
Manual operations
The control unit does not change between the seam patterns
automatically.
–
Select the next seam pattern with the "ï" or "ð" keys.
The shape of the selected seam pattern is indicated on the left half
of the display.
Changing between automatic and manual operations
–
Select the second menu line with the "ñ" and "ò" keys
(sequences) .
–
Press the "OK" key.
–
Select the mode of operation with the "ñ" and "ò" keys.
For automatic operation, arrows are indicated between the seam
patterns.
Automatic operations
Manual operations