Clamping Feet - Duerkopp Adler 511 Operating Instructions Manual

12. Clamping feet

1 19.0 x 3.5 yes
2 20.0 x 4.1 yes
3 26.0 x 4.0 yes
4 9.0 x 3.5 yes
5 4.6 x 20.0 yes
6 18.0 x 11.0 yes
7 40.0 x 20.0 yes
8 8.5 x 3.6 yes
9 14.0 x 14.0 no
10 11.0 x 8.0 no
11 8.6 x 11.6 no
12 11.6 x 7.5 no
13 12.9 x 11.2 no
14 16.0 x 2.6 yes
15 - yes
16 8.6 x 13.6 no
1 all Cross tack
1 all Cross tack
4 all large cross-tack
2 all Small cross-tack
23 all Longitudinal tack
47 all Small-field clamping foot
48 all Large-field clamping foot
11 all Contraction clamp
31 31, 32, 33, 34 Circle
35 35, 36 D-clamping foot, simple
41 41, 42, 43, 44 Double-D clamping foot
sideways
37 37, 38, 39, 40 Double-D clamping foot
Longitudinal
49 49, 50 Double-tri clamping foot
sideways
1 all Cross tack
- - Clamping blank
41 41, 42, 43, 44 Double-D clamping foot
Sideways, large
* Clamping foot cannot be selected. Specify free contour size
Note:
For those clamping feet which have a centre bar (e.g., the double-D
clamping foot on the side or in-house home-made feet), the clamping
foot lift must be decreased so that the needle does not collide with the
centre bar during the referencing movement (refer to the servicing
instructions in Chapter 6.4).
Standard configuration
Cl. 511-211
Standard configuration
Cl. 511-213
Optional
Optional
Optional
Optional
Optional
Standard configuration
Cl. 511-212
Optional
Optional
Optional
Optional
Optional
Optional
Optional*
Optional
1
97