Duerkopp Adler 511 Operating Instructions Manual page 65

8.6.4.4 Free contours
With the automatic bartacker 510, up to nine freely-defined seam
contours can be created and sewn. The entry of the coordinates is
carried out at the control panel.
Design
Edit:
Delete:
Copy
No.st.av.:4900
No.pat.av.:
Creating
Using this menu item, a new seam contour can be created.
Note
The number of the seam contour is assigned automatically.
Altering
After selection of the seam contour to be altered, the sub-menu for
altering the seam contour will appear.
Delete
Using this menu item, a selected seam contour can be deleted.
Copy
Any basic seam pattern number or free seam contour can be copied
and altered. After selection of the seam pattern number, the sub-menu
"Alter seam contour" appears.
Select the desired function with the "ñ" and "ò" keys.
Choose the selected function with the "OK" key.
Note
The number of the seam contour is assigned automatically.
Number of available stitches:
The number of the stitches still available is displayed (max. 5000)
Number of available seam patterns:
The number of the seam patterns still available is displayed (max. 9)
Determining the seam pattern coordinates
When creating a seam contour, every individual stitch has to be
entered in the control unit along with its position in the coordinate
system (X- and Y-axis). Therefore the individual coordinate points have
to be pre-determined.
This can be done with the help of millimetre-scaled graph paper.
0
0
: 0
8
1
61